Installation
17
CONNECTING THE PLUMBING (E24CM76GSS)
[]
[]
[]
[]
II
[]
[]
II
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
!1
I!
[]
Z WARNING
•
To prevent
damage
to the coffee system
due to hard water,
prior to
installation,
check
the water
hardness
for the building
where you will
be installing
the coffee
maker.
See page 12
•
To avoid leaks, do not overtighten
fittings.
Insert the 314" gasket
into the 314" fitting on the water supply hose. Make sure
it is properly
seated.
Connect
the 3/4" end of the hose to the water inlet on the back of the coffee
maker.
Insert the 1/4" gasket
into the 1/4" fitting on the water supply hose. Make sure
it is properly
seated.
Connect
the other end (1/4") of the hose to the water supply.
Back of Coffee
Maker
Power Cord
Waterlnlet
Gasket
Water Supply
Hose