Electrolux ICON E24CM75GSS Installation Instructions Manual page 19

Installation
19
Troubleshooting (Continued)
4. Check the Solutions to Common Problems section of the use and care
,
6.
guide.
Repeat the verification process.
If the appliance still does not work, contact an authorized Electrolux at the
phone number inside the front cover.
INSTALLATION CHECKLIST
[] [] Ii [] III [] [] [] [] [] [] []
[] [] [] II [] [] [] il [] []
AkWARNING
[]
[3
[]
[]
[]
[]
[]
[]
[]
To ensure a safe and proper installation, the following checklist
should be completed by the installer to ensure that no part of the
installation has been overlooked.
Proper installation is the responsibility of the customer. The
importance of proper installation of your coffee maker cannot be
overemphasized.
Is the coffee maker connected to, or using only soft water (4 gpg maximum
hardness)? See page t2.
Has the coffee maker been cleaned completely prior to use as specified in
the use and care guide. See the use and care guide.
Is the coffee maker connected to a dedicated, grounded power receptacle?
See page 9.
Is there a vent hole in the back of the cabinet to allow heat to escape. See
page 7.
Is the steam barrier installed. See Page 11.
Are the cabinet glides properly adjusted. See page 15.
Is the coffee maker locked into the locking tabs on the glides? See page 16.
On E24CM76GSS: Have the water lines been inspected for leaks?
Has the installer verified proper operation? See facing page.