Table of Contents
Advertisement
BUILT-IN INSTALLATION
Verify the minimum measurements required for
correct installation of the appliance.
The coffee maker must be installed in a column
and the column must be firmly fixed to the wall
with commercially available brackets.
Important:
•
Important: all installation or maintenance
operations must be performed with the ap-
pliance disconnected from the mains electri-
city supply.
•
Kitchen furniture in direct contact with the
appliance must be heat resistant (65°C min).
•
To guarantee correct ventilation, leave a gap
at the bottom of the cabinet (see measure-
ments in figure).
h 460 mm
10
h 378 mm
Advertisement
Table of Contents
Troubleshooting
