Glides; Installing The Unit In The Cabinet; Coffee Maker Removal - Electrolux ICON E24CM75GSS Installation Instructions Manual
Built-in coffee maker
Hide thumbs
Also See for ICON E24CM75GSS:
- Technical & service manual (82 pages) ,
- Use & care manual (44 pages) ,
- Use and care manual (44 pages)
Table of Contents
Advertisement
16
Installation
INSTALLING THE UNIT IN THE CABINET
[]
m
[]
[]
[]
[]
[]
m
[]
m
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
V'_ile supporting
the coffee maker from below, insert it into the cabinet
cutout. As you insert it into the cabinet,
line up the glides on the appliance
with the cabinet
glides.
The appliance
should glide on the rails when slight
pressure
is applied to the front of the coffee maker.
If it does not glide
smoothly,
check the distance
between
the glides again.
As you slide the coffee
maker into the cabinet the locking
tab on the glides
will engage.
[]
Locking Tab
COFFEE MAKER REMOVAL
[]
Ii
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
If you need to remove the unit from the cabinet:
•
Disconnect
the power
plug from the power
receptacle.
Press the respective
locking
tabs on the glides and remove the appliance,
supporting
it from below.
Advertisement
Table of Contents
