Table of Contents
Advertisement
Using the Scan Tool
VIEWING ENHANCED DTCs
A "One moment please" message displays while the Scan Tool
retrieves the selected DTCs.
If the Scan Tool fails to link to the
vehicle's
Failed" message shows on the Scan
Tool's display.
-
Verify the ignition is ON, then
press the POWER/LINK
button to continue.
2. To read the display:
Refer to DISPLAY FUNCTIONS on page 8 for a description of
LCD display elements.
A visible
through the vehicle's DLC connector.
The upper right hand corner of the
display shows the number of the
code currently being displayed, the
total number of codes retrieved.
The Diagnostic Trouble Code (DTC)
and related code definition are
shown in the lower section of the
LCD display.
The Scan Tool will display a code only
if codes are present in the vehicle's
computer memory. If no codes are
present, a "No Enhanced DTC's are
presently stored
computer" is displayed. Press the
Honda/Acura Enhanced menu.
3. If more than one code was retrieved press the
necessary, to display additional codes one at a time.
Whenever the Scroll function is used to view additional codes,
the Scan Tool's communication link with the vehicle's computer
disconnects.
POWER/LINK
46
computer,
a
icon indicates that the Scan Tool is being powered
I/M MONITOR STATUS icons are not displayed when
viewing enhanced DTCs.
In the case of long code definitions, or when viewing
Freeze Frame data, a small arrow is shown in the
upper/lower right-hand corner of the code display area
to indicate the presence of additional information. Use
the
and
additional information.
in
the vehicle's
button
to
return
To
re-establish
button again.
"Linking
buttons, as necessary, to view the
to
the
communication,
button, as
press
the
OBD2
Hide quick links:
Advertisement
Table of Contents
