Viewing Enhanced Dtcs - Innova 31603 Owner's Manual

Using the Scan Tool

VIEWING ENHANCED DTCs

If a Manufacturer specific DTC was
retrieved, and the manufacturer selected
for the code was not Chrysler, Jeep, Ford,
Mazda, General Motors, Isuzu, Honda,
Acura, Toyota or Lexus, the message "This
vehicle does
communication" displays. Press the
button to return to the Enhanced Menu.
Enhanced data is not available for your
vehicle.
To view
Enhanced DTCs from the Enhanced Main
Menu (then
manufacturer
VIEWING ENHANCED DTCs on page 40 to
view enhanced DTCs for your vehicle.
To view ABS DTCs: Select ABS DTCs from
the Enhanced Main Menu (then choose the
appropriate manufacturer if prompted). Refer
to VIEWING ABS DTCs on page 48 to view
ABS DTCs for your vehicle.
To view SRS DTCs: Select SRS DTCs from
the Enhanced Main Menu (then choose the
appropriate manufacturer if prompted). Refer
to VIEWING SRS DTCs on page 51 to view
SRS DTCs for your vehicle.
VIEWING ENHANCED DTCs
Refer to the appropriate paragraph to view enhanced data for your
vehicle:
Chrysler/Jeep......................................... page 40
Ford/Mazda............................................ page 42
GM/Isuzu................................................ page 44
Honda/Acura .......................................... page 45
Toyota/Lexus ......................................... page 47
Chrysler/Jeep Enhanced DTCs
When the Scan Tool enters the "enhanced" mode (and Chrysler/Jeep
is selected, if prompted), the Chrysler Enhanced menu displays. You
may view either "Engine DTCs" or "Transmission DTCs."
1. Use the UP
the desired option, then press the ENTER
40
not support
Enhanced DTCs:
choose the
if prompted).
and DOWN
Enhanced
Select
appropriate
Refer to
buttons, as necessary, to highlight
button.
OBD2