Innova 31603 Owner's Manual page 44

Using the Scan Tool
VIEWING ENHANCED DTCs
Whenever the Scroll function is used to view additional codes,
the Scan Tool's communication link with the vehicle's computer
disconnects.
POWER/LINK
4. When the last retrieved DTC has been displayed and the
button is pressed, the Scan Tool returns to the Chrysler Enhanced
menu.
To view additional enhanced DTCs, repeat steps 1 through 4, above.
To exit the enhanced mode, press the
Tool returns to the DTC screen.
Ford/Mazda Enhanced DTCs
Mazda Enhanced DTCs are available for Mazda-branded
Ford vehicles only.
When the Scan Tool enters the "enhanced" mode (and Ford/Mazda is
selected, if prompted), the Ford/Mazda Enhanced menu displays. You
may view DTCs for either the "Continuous Memory Test", "KOEO (Key
On Engine Off) Test" or "KOER (Key On Engine Running) Test."
1. Use the UP
buttons, as necessary, to highlight the
desired option, then press the ENTER
button.
When choosing to view KOER
Test DTCs, start the vehicle's
engine before making your
selection.
A "One moment please" message
displays,
retrieves the selected DTCs.
If the Scan Tool fails to link to the
vehicle's
Failed" message shows on the Scan
Tool's Display.
- Verify the ignition is ON, then
press the POWER/LINK
button to continue.
If the KOER Test was selected, and
the vehicle's engine is not running,
an advisory message shows on the
Scan Tool's display.
- Press the ENTER
Enhanced menu.
2. An "instructional" message shows on the Scan Tool's display.
Perform test procedures as appropriate.
42
To re-establish
button again.
and DOWN
while the Scan
computer, a "Linking
button to return to the Ford/Mazda
communication,
button. The Scan
Tool
press the
OBD2