Innova 31603 Owner's Manual page 46

Using the Scan Tool
VIEWING ENHANCED DTCs
4. If more than one code was retrieved press the
necessary, to display additional codes one at a time.
Whenever the Scroll function is used to view additional codes,
the Scan Tool's communication link with the vehicle's computer
disconnects.
POWER/LINK
5. When the last retrieved DTC has been displayed and the
button is pressed, the Scan Tool returns to the Ford/Mazda
Enhanced menu.
To view additional enhanced DTCs, repeat steps 1 through 5,
above.
To exit the enhanced mode, press the
Tool returns to the DTC screen.
General Motors/Isuzu Enhanced DTCs
When the Scan Tool enters the "enhanced" mode (and General
Motors/Isuzu is selected, if prompted), the GM/Isuzu Enhanced menu
displays. You may view the "MIL DTC", "Current DTC", "Fail Since Clear
DTC" or "History DTC."
1. Use the UP
buttons, as necessary, to highlight the
desired option, then press the ENTER
button.
A "One moment please" message
displays
retrieves the selected DTCs.
If the Scan Tool fails to link to the
vehicle's
Failed" message shows on the Scan
Tool's display.
- Verify the ignition is ON, then
press the POWER/LINK
button to continue.
2. To read the display:
Refer to DISPLAY FUNCTIONS on page 8 for a description of
LCD display elements.
A visible
Scan Tool is being powered through
the vehicle's DLC connector.
The upper right hand corner of the
display shows the number of the
code currently being displayed, the
total number of codes retrieved.
44
To re-establish
button again.
and DOWN
while the Scan
computer, a
icon indicates that the
communication,
button. The Scan
Tool
"Linking
button, as
press the
OBD2