Safety Information - Beam SatDOCK RST980 Installation & User Manual

Safety Information

Note:
Read the following information before installing and using the BEAM
RST980 SatDOCK.
Your RST980 is a low power docking station for the 9505A handset; when ON, it will
charge the 9505A handset whilst docked in the RST980.
The design of your RST980 system complies with international safety standards.
Refer to the appropriate section of this RST980 Installation & User Manual for
additional safety information.
Warning:
Do not open equipment. There are no user-serviceable parts inside.
If a DC power supply is to be used, its output must comply with the
Safety Extra Low Voltage (SELV) requirements of IEC60950.
All connectors except the Line and Accessory sockets must only be
connected to equipment ports which comply with the Safety Extra Low
Voltage (SELV) requirements of IEC60950."
Conventions in this Manual
Warnings, cautions and notes appear throughout this manual and are represented by
following conventions.
Warning:
note providing information to prevent personal injury or damage
to equipment.
Note: This symbol and associated text indicate a note providing
general operating information.
Interference: All wireless phones may get interference, which
could affect performance.
Record: Write details of your unit for easy reference when
required. Ideal when troubleshooting.
RST980 Installation & User Manual
This symbol and associated text indicate a warning
6