Banner Paper Printing Function; Copy Paper; Applicable Paper; Printer Drivers And Supported Operating Systems - Oce cm3522 User Manual

Function detail description
11.10

Banner paper printing function

By specifying the banner print settings on the control panel, allows you to print on the paper up to 47-1/4
inches (1,200 mm) feeded from the bypass tray.
In the following section, setting long paper and printing on it is referred to as banner paper printing.
11.10.1

Copy paper

Applicable paper

Paper width
8-1/4 inch to 11-3/4
inches (210 mm to 297
mm)
11.10.2

Printer drivers and supported operating systems

The following drivers support banner paper printing:
- PCL Printer Driver (PCL driver)
- PostScript Printer Driver (PS driver)
11.10.3

Setting up the printer driver

Specify the output paper size as a custom paper size.
1
Click the Basic tab.
2
Select "Custom Size" from "Original Size" or "Paper Size".
The Custom Size Settings dialog box appears.
3
Specify the length and the width of the custom paper size according to the selected measurement unit.
4
Specify the paper type.
– If necessary, specify the other settings.
5
Click the [OK] button.
Note
For the PCL Printer Driver, custom size setting can also be preregistered on the Initial Setting tab in the
printer driver activated from the Windows "Printer" window ("Printers and Faxes" for Windows
XP/Server 2003).
Océ cm3522/cm2522
Paper length
18 inch to 47-1/4 inches
(457.3 mm to 1,200.0 mm)
Paper type
Thick paper 1, Thick paper 1 + Duplex 2nd Side, Thick
paper2, Thick paper2 + Duplex 2nd Side (33-3/4 Ib to 55-
2 2
3/4 lb (127 g/m to 210 g/m ))
11
11-35