3.3
Original/Density
Settings
Main Screen
3.3.4
Density
Adjust the copy density according to the original condition.
%
Press [Original/Density] ö [Density].
Settings
Light
Standard
Dark
Main Screen
3.3.5
Background Removal
You can adjust the density of the background area for originals with colored background (newsprints, recycle
paper, etc.) or originals on thin paper showing text or images from the back.
%
Press [Original/Density] ö [Background Removal].
Settings
Bleed Removal
VL4522c/VL5522c/VL6522c
Select this setting for an original loaded into the ADF with the top of the
original toward the right side of this machine.
Select this setting for an original placed on the original glass with the top
of the original toward the left side of this machine.
Press this button to return to the basic settings screen with the changed
settings applied.
Each time this button is pressed, the density is lightened by one level.
Press this button to select the center setting (default setting).
Each time this button is pressed, the density is darkened by one level.
Press this button to return to the basic settings screen with the changed
settings applied.
Select this setting to remove background prints of the original. Normally,
select [Bleed Removal].
3
3-17