Compatible Ios Devices - Numark MIXDECX QUARD Quick Start Manual

MAC
Before you can begin using using MIXDECK QUAD with your computer, you must install the Serato DJ Intro software:
1. Insert the included CD into your computer's CD-ROM drive. (Free updates to the Serato DJ Intro software are available
online at http://www.serato.com. We recommend checking the website for the latest update of Serato DJ Intro before
installing it on your computer.)
2. A pop-up screen should appear automatically. Double-click the .dmg file to begin the installation process.
3. Follow the on-screen instructions to install the software.
To start using using MIXDECK QUAD:
1. Connect using MIXDECK QUAD to an available USB port on your computer. (If possible, use a USB port on the rear
panel of your computer.)
2. Open Serato DJ Intro by going to Applications
For more information on how to use Serato DJ Intro, see the manual on the CD.
USING OTHER SOFTWARE PROGRAMS
When using other software programs with MIXDECK QUAD, if you experience too much latency after adjusting your software
latency settings, we recommend the free ASIO4ALL (Audio Stream Input/Output) driver for PC at www.asio4all.com. ASIO
drivers generally perform better and with lower latency since they create a more efficient communication between audio
devices and software.

COMPATIBLE iOS DEVICES

MIXDECK QUAD is compatible with the following iOS devices (not included):
• iPhone 4S
•
iPhone 4
•
iPad 2
•
iPad
•
iPod touch (4th generation)
Note: MIXDECK QUAD's dock will charge a connected and compatible iOS device.
SETUP WITH iOS DEVICES
To play audio from a standard media player app:
1. Set MIXDECK QUAD's rear panel iOS AUDIO switch to AUX 3.
2. Set MIXDECK QUAD's Channel 4 Input Selector to Aux 3.
3. Use MIXDECK QUAD's Channel 4 controls to control the audio sent from your iOS device.
To control a 2-deck DJ app with MIXDECK QUAD:
1. Set MIXDECK QUAD's rear panel iOS AUDIO switch to PGM/CUE MONO.
2. Set two of MIXDECK QUAD's Input Selectors to MIDI USB1 and MIDI USB2.
3. On MIXDECK QUAD, set those decks' Source to "USB-MIDI."
4. Use those channel faders and deck controls on MIXDECK QUAD to control the left and right decks in the app.
Note: An app may have two or four decks. Only set as many of MIXDECK QUAD's Input Selectors to MIDI USB1 and MIDI
USB2 as there are decks in your software app. For example, if your software only has two decks, only have two of MIXDECK
QUAD's Input Selectors set to MIDI USB1 and MIDI USB2.
Note: Since some apps may only support certain channels on MIXDECK QUAD, make sure the channels you selected
communicate properly with the app. For example, an app may allow you to use only Channels 2 and 3 on MIXDECK QUAD
(such as Algoriddim djay) to control the app.
Note: Only iOS 5 or higher supports Core MIDI. This means MIXDECK QUAD will only control Algoriddim djay if your iOS
device is using iOS 5 or higher. Devices with iOS 4 can only be used with the iOS AUDIO SWITCH set to AUX 3.
Serato DJ Intro.
5