Table of Contents
Advertisement
BIOS Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed each time
the system is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue with
bootup. The error messages normally appear on the screen.
Fatal errors will not allow the system to continue to bootup. If a fatal error occurs,
you should consult with your system manufacturer for possible repairs.
These fatal errors are usually communicated through a series of audible beeps.
The numbers on the fatal error list correspond to the number of beeps for the cor-
responding error.
Beep Code/LED
1 beep
5 short beeps
OH LED On
Appendix A: BIOS Error Beep Codes
Appendix A
BIOS Error Beep Codes
Error Message
Refresh
Memory error
System OH
A-1
Description
Circuits have been reset.
(Ready to power up)
No memory detected in the
system
System Overheat
Advertisement
Table of Contents
