(Inputting Statistical Data) - Casio fx-7400G PLUS Booklet

Z-2 Using a Graphic Calculator

(Inputting Statistical Data)

Operation
Table Input
From the Main Menu, enter the STAT Mode.
After confirming the cursor is in line 1 of List 1, input the
voltage values.
w w
0 0.2
(
After confirming the cursor is in line 1 of List 2, input the
current values.
w w
0 0.002
(
Graph Settings
1
Press (GRPH)
f
settings. Use
display and use keys
settings so they are like the ones shown on the screen
nearby.
Graphing
Q1
Press (GRPH)
(scatter diagram).
k Data Editing
• To change data, move the cursor to the data you want to change and over write it with the
correct data.
• To insert data, move the cursor to the location of the insert, and then press
• To delete data, move the cursor to the data you want to delete, and then press
1
(DEL).
* To return from the graph screen to the data input screen, press
w
0.4
, etc.)
w
0.004
, etc.)
[4
(SET) to check the graph
c
and to move the cursor around the
1 [
through
1
(GPH1) to display the graph
to change the
– 68 –
[3
[
Q
.
(INS).