CASIO Interface Unit. This chapter also contains information on how to use the optional SB-62 cable to connect to a CASIO Label Printer to transfer screen data for printing. 1. Connecting Two Units 2.
Chapter 9 Data Communications 1. Connecting Two Units The following procedure describes how to connect two units with an optional SB-62 connecting cable for transfer of programs between them. u u u u u To connect two units 1. Check to make sure that the power of both units is off. 2.
Personal Computer To transfer data between the unit and a personal computer, you must connect them through a separately available CASIO Interface Unit. For details on operation, the types of computer that can be connected, and hardware limitations, see the user’s guide that comes with the Interface Unit.
3. Connecting the Unit with a CASIO Label Printer After you connect the unit to a CASIO Label Printer with an optional SB-62 cable, you can use the Label Printer to print screen shot data from the unit. See the user’s guide that comes with your Label Printer for details on how to perform this operation.
Data Communications Chapter 9 4. Before Performing a Data Communication Operation In the Main Menu, select the LINK icon and enter the LINK Mode. The following data communication main menu appears on the display. Image Set: ... Indicates the status of the graphic image send features. P.172 Off: Graphic images not sent.
Chapter 9 Data Communications 5. Performing a Data Transfer Operation Connect the two units and then perform the following procedures. Receiving unit To set up the calculator to receive data, press 2 (RECV) while the data communi- cation main menu is displayed. 2(RECV) The calculator enters a data receive standby mode and waits for data to arrive.
Page 7
Data Communications Chapter 9 1 (SEL) ..Selects data item where cursor is located. 4 (TRAN) ..Sends selected data items. Use the f and c cursor keys to move the cursor to the data item you want to select and press 1 (SEL) to select it. Currently selected data items are marked with “'”.
Page 8
Chapter 9 Data Communications Data item name 1 (YES) ..Replaces the receiving unit’s existing data with the new data. 4 (NO) ..Skips to next data item. With password check: If a file is password protected, a message appears asking for input of the password.
Page 9
Data Communications Chapter 9 Press 1 (YES) to send the data. 1(YES) • You can interrupt a data operation at any time by pressing A. The following shows what the displays of the sending and receiving units look like after the data communication operation is complete. Sending Unit Receiving Unit Press A to return to the data communication main menu.
To send the screen 1. Connect the unit to a personal computer or to a CASIO Label Printer. P.165 2. In the data communication main menu, press 4 (IMGE), and the following dis- P.167...
Data Communications Chapter 9 You cannot send the following types of screens to a computer. • The screen that appears while a data communication operation is in progress. • A screen that appears while a calculation is in progress. • The screen that appears following the reset operation. •...