Casio fx-7400G PLUS Booklet page 13

(3) This makes it possible to obtain flow velocity v in List 3.
Exercise 2
From the data in Excercise 1, graph the relationship between water depth h [cm] and flow
velocity v [cm/s].
Solution:
With the h [cm] on the horizontal axis and v [cm/s] on the vertical axis, point data points and
then draw a regression curve.
Graphic Calculator Operation
(1) From the Main Menu, enter the STAT Mode.
(2) Assign List 1 to the X-axis (XList) and List 3 to the Y-axis
(YList).
1
Use (GRPH)
shown in the illustration to the right.
Q 1
Press
(3) Regression by Function
The formula for this exercise can be expressed as v = 36.0 h ,
which is power regression.
Coefficients can be obtained by
4
(DRAW)
Note
When the hole position is 0 [cm] in this exercise, the flow rate is 0. When h = 0 then v = 0.
Adding this data to the top of the list makes drawing of the regression curve easier.
[ 4
(SET) to configure the settings
1
(GRPH) (GPH1) to draw the graph.
[3
(Pwr).
– 10 –
EM-1 Water Depth and Flow Velocity