Function Expressing The Relationship Between Time Taken And Distance Traveled - Casio fx-7400G PLUS Booklet

E-2 Function Expressing the Relationship
Between Time Taken and Distance Traveled
Exercise
Function Expressing the Relationship Between
Time and Distance Traveled
The nearby table is being configured for
when it is assumed that distance covered
function of time taken
and graph the expression
1. Input the table.
From the Main Menu, enter the STAT Mode.
After making sure the first line of List 1 is highlighted, input the
following.
w
30 60
After making sure the first line of List 2 is highlighted, input the
following.
w
125 500
2. Configure graph settings.
1
Press (GRPH)
tings.
f c
Use and
2
Press (xy) so the screen appears as shown to the right.
3. Draw the graph.
Q1
Press (GRPH)
plotted points are linked.
4. Configure graph 2.
Q
Press and then
the graph settings.
Move the highlighting to G-Type and then press
The display should change as shown to the right.
t [sec]. Complete the table
f t
( ).
w w
90 180
• • •
w w
1125
• • •
[4
(SET) and check the graph set-
to move the highlighting to G-Type.
1
(GPH1) to display a graph in which
1 [4
(GRPH)
JIKKYO SHUPPAN CO., LTD.: SHIN KOGYO SURI
s = f ( t )[m],
s
[m] is a
w
w
4500
(SET), and check
1
(Scat).
– 3 –
(NEW EDITION)
t s
Time Distance
[min] [sec] [km] [m]
0.5 0.125
1.0 0.500
1.5 1.125
2.0 2.000
2.5 3.125
3.0 4.500