Multitech MultiConnect User Manual page 43

Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
set ppp <interface> dialing-max-retries <0-100>
Configures the maximum number of dialing retries.
Maximum dialing retry is 100
5
OK
1. Too few arguments
"Usage: set ppp ppp0 dialing-max-retires [0-100](times)
Type 'set ppp ppp0 dialing-max-retries ?' for more information"
2. Multiple matches
dialing-max-retries and dialing-retry-interval
3. Retry range
"error: dialing-max-retries range : [0 - 100]
Type 'set ppp ppp0 dialing-retry-interval ?' for more information"
set ppp <interface> dialing-retry-interval <0-300>
Configures the interval for the port to retry dialing.
Maximum dialing retry is 300.
15
OK
1. Too few arguments
"Usage: set ppp ppp0 dialing-retry-interval [0-300](secs)
Type 'set ppp ppp0 dialing-retry-interval ?' for more information"
2. Multiple matches
dialing-max-retries and dialing-retry-interval
3. Retry range
"error: dialing-retry-interval range : [0 - 300]
Type 'set ppp ppp0 dialing-retry-interval ?' for more information"
set ppp <interface> idle-timeout <0-900>
Configures the dial-on-demand idle timeout value .Maximum dialing retry is
900 secs
600 secs
OK
1. Too few arguments
"Usage: set ppp ppp0 idle-timeout <0-900>
Type set ppp ppp0 idle-timeout ?' for more information"
2 Idle timeout range
"error: dod-idle-timeout range : [0 - 900]
Type 'set ppp ppp0 idle-timeout ?' for more information"
set ppp <interface> ipcp-mode <client-only/client-or-lan>
Sets the IPCP mode-to-client-only or client or LAN.
client-only
OK
1. Too few arguments
Possible argument(s) are client-only and client-or-lan
2. Invalid string
Invalid argument.
Valid argument(s) are client-only and client-or-lan
Chapter 4 – Command Line Interface (CLI)
PPP Commands – Setup
43