Multitech MultiConnect User Manual page 18

Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
user password <username> <new password>
Change the password for a user.
NA
OK
1. Too few arguments
"Too few arguments. Possible value(s) are username followed by
password"
2. Unable to change the password
"Password does not match
Unable to change user <username> password"
set operation-mode <modem/ipmodule>
modem - In the modem mode, the target functions like a modem
ipmodule - In the ipmodule mode, all the functional features of
MultiConnect IP can be achieved.
Ipmodule
OK
1. Too few arguments
"Too few arguments. Possible argument(s) are modem and ipmodule
2. Invalid string
"Invalid argument "string"
Valid argument(s) are modem and ipmodule
set boot-messages <enable/disable>
enable - Prints the boot-messages during module boot-up.
disable - Suppresses the boot-messages during module boot-up.
Enable
OK
1. Too few arguments
"Too few arguments. Possible argument(s) are disable and enable
2. Invalid string
"Invalid argument "string"
Valid argument(s) are disable and enable
set date <DD/MM/YYYY>
Sets the system date.
Jan 1 1970
OK
1. Too few arguments
Usage: set date DD/MM/YYYY
Type 'set date ?' for more information
Error: Date in DD/MM/YYYY format
Too few arguments. Possible argument(s) are
ip
serial
Chapter 4 – Command Line Interface (CLI)
General Commands – Setup
ppp date
login time
18