Chapter 4 - Command Line Interface (Cli); General Notes - Multitech MultiConnect User Manual

Chapter 4 – Command Line Interface
The MultiConnect commands are grouped based on the functionality.
•
General Setup Commands
•
IP Setup Commands
•
Serial Setup Commands
•
PPP Setup Commands
•
HTTP Setup Commands
•
SMTP Setup Commands
•
POP3 Setup Commands
•
FTP Client Setup Commands
•
SNTP Client Setup Commands

General Notes

•
Required command parameters are indicated between < >.
•
Optional command parameters are indicated between [ ].
•
Parameter choices are delineated by /.
•
Upon successful execution of a command, the "OK" string is echoed to the client.
•
When an unsuccessful command is executed, an appropriate error message is displayed
followed by an "ERROR" string.
•
All the commands are case sensitive (they must be typed in lower case).
•
PPP is enabled on the modem interface S1.
•
All serial-related applications such as dial-in and dial-out are with respect to the serial
interface S0.
•
The PPP interface is the modem interface S1.
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
Chapter 4 – Command Line Interface (CLI)
(CLI)
15