Panic Recording; Series Recording - Security Labs SL800 User Manual

Panic Recording

This feature is similar to an alarm recording, but the
recording time is not pre-selected.
When there is a panic input at the PANIC IN Terminal,
recording will start and continue for up to 2 hours.

Series Recording

Using 2 VCRs or more, the series recording function lets
you switch recording from one unit to the next (only
with VCRs of the same model as this one).
Series Recording Setup
1 Connect 2 VCRs or more as illustrated below.
2 Set the following items as indicated.
Item
Cassette tape
Operation mode
Repeat Rec Set
Series Rec Set
• During series recording,
Timer recording
autorepeat recording or
timer recording are not
Security lock switch (SET LOCK switch)
possible.
• If in the REC MODE SET
3 Press the REC button on VCR No.1.
menu, "Series Rec Set" is
set to "NO", series
• Recording will start in series recording mode.
recording will not be
possible.
22
VCR No.1 VCR No.2
and on
Loaded Loaded
Stop Stop
"NO" "NO"
"YES" "YES"
OFF (not set) OFF (not set)
"OFF" "ON"
960-Hour Time Lapse Video Cassette Recorder
4 Set the security lock on VCR No.1.
• When the end of the tape on VCR No.1 is reached, the
output at the SERIES OUT terminal will switch signal.
This will start recording on VCR No.2, the tape will stop
and be ejected on VCR No.1.
960-Hour Time Lapse Video Cassette Recorder 23