Alarm Recording - Security Labs SL800 User Manual

To Cancel a Program Timer Recording
1 Repeat step 1 above.
2 Press the SHIFT
located in the "Y" corresponding to the timer
recording to cancel.
3 Press the SET - (or +) button, to select "N".
4 Press the MENU button three times until the normal
screen is displayed.
5 Press the POWER/TIMER button.
• The clear button can erase the programmed timer
recording in the line that the cursor is located.
Notes...
• During timer recording all the buttons on the VCR, except
the STOP button, are disabled. If the STOP button is
pressed for three seconds during timer recording, the
recording will stop. During timer recording stand-by,
press the POWER/TIMER button if the buttons do not
respond.
• If there is a power loss, the recording will be interrupted.
When the power is restored, the recording will resume if
the stop time has not yet been reached, and "
flashing on the display panel. The VCR internal battery is
completely charged after the VCR has been connected to
an AC power outlet for 48 hours, and it will maintain all
the VCR settings memory for up to 30 days.
• Set the timer recordings so that the recording times do
not overlap. If they do, the one with the earliest recording
start time will have priority.
(See chart below)
• If the cassette tape is ejected while timer recording is set,
the buzzer will be heard 5 times (when the buzzer
function is set to "YES".)
18
(or ) button until the cursor is
" will be
960-Hour Time Lapse Video Cassette Recorder

Alarm Recording

Alarm Recording Setting
Alarm recording is performed when there is an input
(trigger) at the ALARM IN terminal, "
on the display panel.
1 Make all necessary connections.
2 Press the MENU, SHIFT
sequence to display the REC MODE SET menu .
3 Press the SHIFT
points to Alarm Rec Set.
4 Press the SHIFT
SET menu.
5 Press the SHIFT
• YES . . . . . The alarm recording takes place when there
• During alarm recording all
• NO . . . . . . The alarm recording does not take place
buttons are disabled
except the STOP button. If
6 Press the SHIFT
the STOP button is
pressed, the alarm 7 Press the SHIFT
recording will stop.
recording speed.
• If an alarm trigger is
• 2H . . . 2-hour mode recording
received while alarm
recording is in progress,
• 12H . . . 12-hour mode recording
the recording duration for
• 24H . . . 24-hour mode recording
the second alarm will be
calculated from that point.
8 Press the SHIFT
• When there is a power
9 Press the SHIFT
loss during alarm
recording duration.
recording, if the power is
restored within the
• Auto : Records as long as the alarm signal is being
recording set duration,
alarm recording will
continue.
960-Hour Time Lapse Video Cassette Recorder
" is displayed
, SHIFT buttons in
button until the arrow mark (
button to display the ALARM REC
button to select "YES" or "NO".
is alarm trigger input
button to set the Alarm speed.
button to select the desired
button to set the alarm duration
button to select the desired
input. (Minimum 2 minutes is recorded.)
)
19