Normal Recording; Program Timer Recording - Security Labs SL800 User Manual

Normal Recording

Normal Recording
• If the Repeat Rec Set is set
1 Turn the power on to all devices used.
to "NO" in the REC
MODE SET menu ,
2 Load a cassette tape with erasure prevention tab in
recording will continue to
place.
the end of the tape, then
stop and the tape will be
3 Press the REC/PLAY SPEED
ejected.
the recording speed.
• The recording speed is displayed on-screen and on the
display panel.
• If you don't want to record the recording speed,
counter, title, time, date etc, press the DISPLAY button,
then start recording.
4 Press the REC button.
• A tape recorded on this
VCR cannot be played
• The "REC" indicator is displayed on the display panel
back on another make of
and recording starts.
time lapse VCR.
5 To stop recording, press the STOP button.
• If you press on the REC
button and the loaded
<Recording Speed>
cassette has no erasure-
prevention tab, the VCR
will eject the cassette. Recording
Speeds
• During recording, the
Menu button will not
function (the menu cannot
12
be accessed).
24
36
48
72
• If you playback the
96
recorded part where
120
recording check was
168
performed, noise may
240
appear.
360
• If you change the
480
recording speed during
720
recording, noise or
960
missing signal may result.
Record Pause
Recording can be interrupted temporarily.
• During pause, the image
appears on screen but it is
1 Press the PAUSE/STILL button during recording.
not recorded.
• The "REC" and "
• If a recording pause
continues for 5 minutes or display panel.
more, the VCR will go into
2 To resume recording, press the REC button, or press
stop mode to avoid
damage to the tape.
the PAUSE/STILL button again.
14
(or ) button to set
Maximum recording
Audio
Recording
duration (with an
interval
Recording
T-120 cassette tape)
2 Standard mode 1/60 second
Possible
0.12
0.22
0.32
0.42
0.62
Time Lapse mode 0.82
1.02
Not possible
1.42
2.02
3.02
4.02
6.02
8.02
" indicators are displayed on the
960-Hour Time Lapse Video Cassette Recorder

Program Timer Recording

Tape Motion
Continuous
Intermittent
960-Hour Time Lapse Video Cassette Recorder
There are two program timer recording methods, daily
recording or recording on certain days of multiple weeks
(weekly recording).
Example 1 : To record on every Thursday from 10 : 00 to
18 : 00, in 24-hour mode (recording speed)
1 Make sure that the set date and time are correct.
2 Load a cassette tape with erasure prevention tab in
place.
3 Press the MENU, SHIFT , SHIFT
buttons in sequence to display the TIMER PROGRAM
SET(1) menu.
• The white block cursor is on "SUN"(Sunday).
4 Press the SHIFT button, until the cursor is on "THU".
5 Press the SHIFT button.
• The cursor is moved to the recording start hour position.
6 Press the SET - (or +) button to set the recording
start hour(eg : 10), then press the SHIFT
• The cursor is moved to the recording start minutes
position.
7 Press the SET - (or +) button to set the recording
start minute (eg : 00), then the SHIFT
• The cursor is moved to the recording stop hour position.
8 Press the SET - (or +) button to set the recording
stop hour(eg : 06), then press the SHIFT
• The cursor is moved to the recording stop minutes
position.
, SHIFT
button.
button.
button.
15