Panic Recording; Series Recording - Security Labs SL810 User Manual

• 3/5/10/15/20/25/30 MIN : Recording for the set
• T.END : Records until the tape end is reached when
Alarm Recording Counter Display
• Alarm Counter Reset can
During alarm recording, "
be performed by pressing
display panel.
the CLEAR key in "Alarm
Time" of Initial Menu
The maximum display number of alarm triggers is "35",
screen.
at the next alarm recording the counter will indicate
"00".
20
duration.(MIN : minute)
there is alarm trigger input.
" will be flashing on the
960-Hour Time Lapse Video Cassette Recorder

Panic Recording

This feature is similar to an alarm recording, but the
recording time is not pre-selected.
When there is a panic input at the PANIC IN Terminal,
recording will start and continue for up to 2 hours.

Series Recording

Using 2 VCRs or more, the series recording function lets
you switch recording from one unit to the next (only
with VCRs of the same model as this one).
Series Recording Setup
1 Connect 2 VCRs or more as illustrated below.
2 Set the following items as indicated.
Item
Cassette tape
Operation mode
Repeat Rec Set
Series Rec Set
• During series recording,
Timer recording
autorepeat recording or
timer recording are not
Security lock switch (SET LOCK switch)
possible.
• If in the REC MODE SET
3 Press the REC button on VCR No.1.
menu, "Series Rec Set" is
set to "NO", series
• Recording will start in series recording mode.
recording will not be
possible.
960-Hour Time Lapse Video Cassette Recorder
VCR No.1 VCR No.2
and on
Loaded Loaded
Stop Stop
"NO" "NO"
"YES" "YES"
OFF (not set) OFF (not set)
"OFF" "ON"
21