Connections; Video Cassettes Tapes - Security Labs SL800 User Manual

Connections

Connect the video camera and monitor TV as shown in
the figure below.
NOTE : Make sure to turn the power off on all devices
before making the connections.
Power Cord Installation
Insert the plug of the power cord into an outlet.
• For more details, please
refer to the manuals
accompanying all other
devices. If the connections
are not made properly, it
may cause a fire or
damage the equipment.
6 960-Hour Time Lapse Video Cassette Recorder

Video Cassettes Tapes

Use only video cassette tapes bearing the
This VCR was primarily designed for use with T-120
cassette tapes. It is recommended to use T-120 VHS video
cassette tapes for optimal performance.
Handling Cassette Tapes
• If you try to record on a
Cassette tapes should always be stored vertically in their
cassette without the erasure-
prevention tab, the VCR will cases, away from high temperatures, magnetic fields,
eject the cassette.
direct sunlight, dirt, dust and locations subject to mold
• If the TIMER button is formation.
pressed when a cassette
Do not tamper with the cassette mechanism.
without the erasure-
prevention tab is loaded,
Never touch the tape with your fingers.
the VCR will eject the
cassette, the timer recording
Protect cassette tapes from shocks or strong vibrations.
indicator ( ) will start
flashing and a buzzer will
To Protect your recordings
sound if "YES" is set in the
After having recorded a tape, if you wish to keep the
menu for buzzer.
recording, use a flathead screwdriver to break off the
erasure-prevention tab on the cassette.
• When the cassette is
To record again on a tape without erasure-prevention tab,
loaded, the cassette
cover the hole with adhesive tape.
indicator " " will light
on the display panel.
Erasure-prevention tab
• The counter display will
switch to the reset counter
"0H 00M 00S" display on
the monitor screen. ("0H
00M" on the display
panel.)
Loading
• Do not insert any object in
the cassette loading slot, as
that may cause injury and
damage to the VCR.
• If your hand gets stuck in
the cassette loading slot,
unplug the power cord and
consult the dealer where the
Unloading
unit was bought. Do not
forcibly pull the hand out as
In STOP mode, press the EJECT button. The cassette is
that may cause severe
automatically ejected.
injuries.
960-Hour Time Lapse Video Cassette Recorder
logo.
To prevent accidental erasure, remove the
tab after recording.
To record again, cover the hole with vinyl
tape.
Place the cassette, label
side up, in the loading
slot. Gently push the
center of the cassette
until it is loaded
automatically.
7