Setting The Security Lock (Set Lock); Setting The Sw Out Terminal Output; Setting The Buzzer - Security Labs SL800 User Manual

Setting the Security Lock (Set Lock)

The security lock function is designed to prevent
accidental stopping of recording if the STOP button is
pressed inadvertently.
1 Set the SET LOCK switch to "ON" position.
• "
• While the security lock is
engaged, all commands
2 To cancel the security lock, set the SET LOCK switch
are disabled.
to "OFF" position.
• The security lock should
• "
not be engaged while a
menu is displayed.

Setting the SW Out Terminal Output

Synchronization pulses for multiplexers can be obtained
from the SW OUT terminal.
1 Press the MENU button, to display the initial MENU.
2 Press the SHIFT
(
3 Press the SHIFT
TERMINAL SET menu.
• If "TIMING" is set to
FRAME (see step 6),
"FRAME" will be indicated
instead of "FIELD".
4 Press the SHIFT
"FRAME").
• With each press of the SHIFT
changes as indicated below.
5 Press the SHIFT
6 Press the SHIFT
• FIELD . . . 1 pulse is output after each set number of
• FRAME . . 1 pulse is output after each set number frames.
30
" is displayed on the display panel.
" will be erased from the display panel.
button to move the arrow mark
) to SW OUT Terminal Set.
button to display the SW OUT
button to set "FIELD" (or
button, the setting will
button, to select Timing.
button to set the "TIMING".
fields.
960-Hour Time Lapse Video Cassette Recorder
7 Press the MENU button, the normal screen is
displayed.
• The setting procedure is now complete.

Setting the Buzzer

1 Press the MENU button to display the initial MENU.
2 Press the SHIFT
In the following cases, the
buzzer will be heard
The VCR MODE SET menu is displayed.
approximately 5 times.
- If the REC button is pressed
while a cassette without
erasure-prevention tab is
loaded.
- If a cassette, without the
erasure - prevention tab, is
loaded while the timer is
set.
3 Press the SHIFT
- If there is a series
(
recording input while a
cassette without erasure-
4 Press the SHIFT
prevention tab is loaded.
functions described below.
- If the TIMER button is
pressed without inserting a
• The buzzer will be heard whenever a button is pressed.
cassette.
• If "NO" is set, the buzzer
will not operate.
960-Hour Time Lapse Video Cassette Recorder
button to select VCR Mode Set.
button to move the arrow mark
) to Buzzer Set.
button to set "YES" for the
31