Alarm Recording; Panic Recording; Series Recording - Security Labs SL 700 User Manual

Alarm Recording

Alarm Recording Setting
Alarm recording is performed when there is an input
(trigger) at the ALARM IN terminal, "
on the display panel.
1 Make all necessary connections.
2 Press the MENU, SHIFT
sequence to display the REC MODE SET menu .
3 Press the SHIFT
points to Alarm Rec Set.
4 Press the SHIFT
SET menu.
5 Press the SHIFT
• YES . . . . . The alarm recording takes place when there
• During alarm recording all
• NO . . . . . . The alarm recording does not take place
buttons are disabled
except the STOP button. If
6 Press the SHIFT
the STOP button is
pressed, the alarm 7 Press the SHIFT
recording will stop.
recording speed.
• If an alarm trigger is
• 2H . . . 2-hour mode recording
received while alarm
recording is in progress,
• 6H . . . 6-hour mode recording
the recording duration for
• 18H . . . 18-hour mode recording
the second alarm will be
calculated from that point.
8 Press the SHIFT
• When there is a power
9 Press the SHIFT
loss during alarm
recording duration.
recording, if the power is
restored within the
• Auto : Records as long as the alarm signal is being
recording set duration,
alarm recording will
continue.
19
" is displayed
, SHIFT buttons in
button until the arrow mark(
button to display the ALARM REC
button to select "YES" or "NO".
is alarm trigger input
button to set the Alarm speed.
button to select the desired
button to set the alarm duration
button to select the desired
input. (Minimum 2 minutes is recorded.)
Time Lapse Video Cassette Recorder
• Alarm Counter Reset can
be performed by pressing
the CLEAR key in "Alarm
Time" of Initial Menu
screen.
)

Panic Recording

Series Recording

Time Lapse Video Cassette Recorder
• 3/5/10/15/20/25/30 MIN : Recording for the set
duration.(MIN : minute)
• T.END : Records until the tape end is reached when
there is alarm trigger input.
Alarm Recording Counter Display
During alarm recording, " " will be flashing on the
display panel.
The maximum display number of alarm triggers is "35",
at the next alarm recording the counter will indicate
"00".
When there is a panic input at the PANIC IN Terminal,
panic recording starts and continues to the end of tape
in 2-hour recording mode.
Using 2 VCRs or more, the series recording function lets
you switch recording from one unit to the next (only
with VCRs of the same model as this one).
Series Recording Setup
1 Connect 2 VCRs or more as illustrated below.
2 Set the following items as indicated.
Item VCR No.1
Cassette tape Loaded
Operation mode Stop
Repeat Rec Set "NO"
Series Rec Set "YES"
Timer recording OFF (not set) OFF (not set)
Security lock switch (SET LOCK switch) "OFF"
VCR No.2
and on
Loaded
Stop
"NO"
"YES"
"ON"
20