Daily Inspection; Troubleshooting Guide - Security Labs SL800 User Manual

Daily Inspection

The following daily inspections are recommended in
order to assure long-term and trouble-free operation of
the unit.
The daily inspections are particularly important if using
autorepeat recording.
Inspection Procedure
1 Turn on the power to the camera, TV monitor and
other connected devices.
• If the security lock is
engaged, it has to be
2 Check that the image received on the TV monitor is
released before
correct.
proceeding with the
inspection.
3 Check that the on-screen display of the date and time
• If any problem is
is correct.
discovered during the
inspection,unplug the 4 Press the REW button to rewind the recorded tape a
power cord and consult
few seconds.
your dealer.
5 Press the PLAY button and check that the playback
image is correct.
• Check in particular playback of time lapse recording
(12 or 24 hour mode)
6 Check that the recorded date and time are correct.
38 960-Hour Time Lapse Video Cassette Recorder

Troubleshooting Guide

If the unit does not operate normally when you follow the instructions indicated in
the manual, please refer to the table below.
SYMPTOM POSSIBLE CAUSE
No power. The power cord is not correctly
connected to the wall outlet.
The unit is in timer recording stand-
by mode.
No image The connections are not correct.
displayed on the The power to the camera and/or
monitor TV. monitor TV is not turned on.
The buttons do The unit is in timer recording stand-
not respond. by mode.
Alarm recording.
Panic recording.
The security lock(SET LOCK) is
engaged.
Unit will not go The loaded cassette has no
into record erasure prevention tab.
mode.
Autorepeat. "NO" is selected for autorepeat
recording in the REC MODE SET
menu.
During autorepeat recording when
there is an alarm input, autorepeat
recording is canceled.
960-Hour Time Lapse Video Cassette Recorder
CORRECTIVE ACTION
- Connect the power cord firmly into
the walloutlet.
- This is normal, not a malfunction.
- Check that all connections are correct.
- Turn all connected devices power
on.
- Press the POWER/Timer button.
- Wait for the alarm recording to end.
- Press the STOP button for 3 seconds
to stop.
- Wait for the panic recording to end.
- Press the STOP button for 3 seconds
to stop.
- Cancel the security lock.
- Load a cassette tape with
erasure prevention tab or cover the
tab hole with adhesive tape.
- Be sure to select "YES" for
autorepeat recording.
- Set "YES" again for autorepeat
recording.
39