Alarm Scan; Index Search; Other Functions; Tape Counter (Zero Search) - Security Labs SL800 User Manual

Alarm Scan

1 Repeat steps 1 to 3.
2 Press the SHIFT
reverse without entering a specific alarm number.
• The display returns to the normal screen.
• The VCR will advance (or rewind) the tape at high
speed, and playback the first 5 seconds of every alarm
recording.
• To cancel the alarm scan mode, press the STOP button.
3 While the desired recording is being played back,
press the PLAY button.
• Playback will start, and alarm scan is cancelled.

Index Search

1 Repeat steps 1 to 2.
2 Move the arrow mark (
Index Search mode as you want to search.
3 Press the SHIFT
reverse.
• In the index search mode,
• The display returns to the normal screen.
SHIFT button should be
used to search forward or
• The VCR will advance (or rewind) the tape at high
in reverse ( Index FF /
speed and playback the first 5 seconds of every normal
REW).
recording.
• To cancel the index search mode, press the STOP
button.
4 While the desired recording is being played back,
press the PLAY button.
• Playback will start, and index search is cancelled.
28
button to search forward or in
) to the FF or REW in the
button to search forward or in
960-Hour Time Lapse Video Cassette Recorder

Other Functions

Tape Counter (Zero Search)

• When you insert a Using the counter, it is easy to find a desired recording.
cassette, the counter
1 Press the CLEAR button, at the beginning of the
always resets to zero.
desired recording.
• There is no tape counter
indication for the blank
• The counter will be reset to "0H 00M 00S" (on screen).
portions of tape.
• The counter will be reset to "0H 00M"(on the display
• In the 2-hour recording
panel).
speed mode only, the tape
counter indicates real 2 After recording or playback, press the Menu button
hours, minutes and
to display the initial MENU.
seconds.
3 Press the SHIFT
• In the other SP recording
(
speed modes(24H, 36H),
the tape counter indication
4 Press the SHIFT
is a ratio of the 2-hour
mode base indication.(In SELECT menu. The SEARCH SELECT menu is
24-hour recording mode,
displayed.
each "second" of the tape
counter actually represents
approximately 24/2 =
12 real seconds.)
• There may be a slight
discrepancy between the
position shown on the
tape counter and the
actual tape position.
• When rewinding the tape
5 Press the SHIFT
past the "0H 00M 00S"
(
position("0H 00M" on the
display panel), a minus(-)
6 Press the SHIFT
displayed.
00M 00S"("0H 00M" on the display panel).
• The display returns to the normal screen.
• The tape is rewound or advanced to the counter "0H
00M 00S" reading("0H 00M" on the display panel).
960-Hour Time Lapse Video Cassette Recorder
button to move the arrow mark
) to Search Select.
button to display the SEARCH
button to move the arrow mark
) to Zero Search.
button to search the counter "0H
29