Anti Junk Fax - Sharp FO-4500 Operation Manual

YF <P=001>
The Anti Junk Fax function allows you to block reception of faxes from parties which
you specify. This saves paper by not printing out unwanted "junk" faxes.
To use this function, first turn it on by setting Option Setting 21 to YES as described in
Chapter 5, and then enter the fax numbers from which you do not want to receive
faxes as shown below.
Comments:
• •
Up to 50 numbers can be entered in the Anti Junk Number List.
• •
To clear a number from the Anti Junk Number List, you need to know the 2-digit number
which identifies it. If you have forgotten this number, print out the Anti Junk Number List as
described in Chapter 6.
Step Press these keys:
FUNCTION
1
7
2
1
3
0
4
5
5 5
5
START
6
7
Step 4 or

ANTI JUNK FAX

Comments
3
"ENTRY MODE" will appear in the display.
"STORE JUNK FAX #" will appear in the display.
Press "1" to store a fax number in the Anti Junk
or
2
Fax List, or "2" to clear a fax number from the list.
Storing: Enter a number from "01" to "50". This
number identifies the fax number you will store
1
in the next step.
Clearing: Enter the number which identifies the
(Example)
fax number you want to clear, and go to Step 6.
1 2 4
3
Enter the fax number (max. of 20 digits).
(Example)
STOP
Return to Step 4 to enter (or clear) another
number, or press STOP one or more times until
you return to the date and time display.
SPECIAL FUNCTIONS
FO4500H-SFAJ
4-35