Initial Settings; A Look At The Operation Panel - Sharp FO-4500 Operation Manual

YF <P=001>

A LOOK AT THE OPERATION PANEL

Before you can begin using your fax, there are some settings which must be made
using the keys on the operation panel. First take a moment to familiarize yourself with
the operation panel, and then make the settings as described on the following pages.
Display
This displays various
messages during operation
and programming.
Service indicator
This lights when a
problem occurs which
must be fixed by a
service engineer.
Drum cartridge indicator
This blinks when the drum
cartridge nears the end of its
life, and lights steadily when the
drum cartridge needs
replacement.
Toner cartridge indicator
This blinks when toner nears
empty, and lights steadily
when the toner cartridge
needs replacement.
2

INITIAL SETTINGS

LINE-STATUS light
This lights when the fax
machine or other device
sharing the same line is
using the telephone line.
LINE-STATUS
CHANGEOVER
Paper out indicator
This blinks when one of the
paper sources (cassette or
tray) is out of paper, and lights
steadily when all sources are
out of paper.
INITIAL SETTINGS
FO4500H-IPOP
RESOLUTION
IN USE STANDARD
RESOLUTION key
FINE
Press this key to adjust
SUPER FINE
the resolution before
HALF TONE
sending or copying a
document.
CHANGEOVER key
Two types of information appear in the
display: prompts related to operations
you are performing, and information
about how the fax is using the telephone
line (transmitting, receiving, etc.). Press
this key to switch between the two types
of information.
2-1