Sharp FO-4500 Operation Manual page 36

<P=004>
SENDING DOCUMENTS
Checking documents in memory
To display information on the documents that are waiting in memory for transmission,
follow the steps below. You can also cancel a transmission with this procedure.
Step Press these keys:
MEM.STATUS
1
W
2
STOP
3
If desired, you can also print out a list of the documents waiting in memory for
tranmission. To do so, press the MEM.STATUS key and then the "5" key.
To cancel a memory transmission
If you know the memory number assigned to a memory transmission, you can cancel
it with the following procedure. (If you don't know the memory number, use the
procedure above.)
Step Press these keys:
MEM.STATUS
1
W
0 0
2
START
3
3-4
Comments
Press the MEM.STATUS key (flip up the Rapid
2 Key overlay if necessary) and the "2" key. "TX
STATUS" will appear in the display.
Press the "#" key or the "*" key to scroll through
the list of transmissions. The name (or number)
of each receiving party will appear in the display,
together with the 3-digit memory number
or
assigned to the transmission. To cancel a
transmission, press the CLEAR key and then
the START key while the transmission appears
in the display.
STOP
When you have finished checking the list, press
the STOP key twice to exit.
Comments
Press the MEM.STATUS key (flip up the Rapid
4
Key overlay if necessary) and the "4" key.
"MESSAGE CLEAR" will appear in the display.
Enter the 3-digit memory number assigned to
1
(Example)
the transmission you want to cancel.
Press the START key to cancel the transmission.
BASIC OPERATIONS