Turning The Tv On; Tuning The Tv For The First Time - Toshiba 32CV700E Owner's Manual

Turning the TV on

Switching on the TV
Connect the power cord to a wall outlet, the
! power indicator lights in red (standby mode).
1
Press on the remote control or ! on the
TV right side panel, the ! power indicator
lights in green.
Note:
If you watch black and white programmes when
the Colour System mode is set to Auto, colour
noise may appear on the screen. In this case
select the appropriate Colour System (For the
system of each country or region, refer to pages
13, 30).
Switching off the TV
1
Press on the remote control or ! on the
TV right side panel to switch to the standby
mode.
Notes:
• When the TV will not be used for a long period
of time, such as during vacation or travel,
remove the power plug from the wall outlet.
• The TV will automatically turn itself off after
approximately 15 minutes if it is tuned to a
vacant channel or a station that completes its
broadcast for the day. This function does not
work in external input or Blue screen Off mode.
The TV will automatically turn itself off after
approximately 2 hours if you do not operate the
TV after turned on by on timer function.
• If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the
TV automatically when power is applied again.
If power is going to be off for a long time and
you are going to be away from your TV, unplug
the power cord to prevent the TV from turning
on in your absence.

Tuning the TV for the first time

Before switching on the TV, put your decoder and
media recorder to standby, if they are connected,
and ensure that the aerial is connected. To setup
the TV, use the buttons on the remote control as
detailed on page 9.
1
button. The Quick Setup
Press the
screen will appear. This screen will appear
the first time that the TV is switched on.
Quick Setup
Language
10
Introduction / Getting started
English
2
Press v or w to select the menu language
(English, Chinese (CS), Malay, Thai,
Vietnamese, Russian, Arabic, Persian or
French).
3
Press Q, to display the Location menu (-
page 13).
Press v or w to select Store or Home. For
normal home use, select Home.
Location
To use the TV for displaying in
a store showroom, please select [Store].
[Home] mode is recommended
for normal use.
Store mode:
AutoView menu is not available.
4
Press Q to display the AutoView menu (-
page 16).
Press v or w to select Yes or No.
AutoView
AutoView mode automatically
adjusts picture settings to suit
ambient light conditions. Do you
wish to enable AutoView mode?
5
Press Q to display the Auto Signal Booster
menu (- pages 12, 13), and then v or w to
select Yes or No.
Auto Signal Booster
Signal Booster boosts weak analogue broadcast signals.
If you select [Yes], the TV will automatically set this
feature to [On] or [Off] according to signal strength.
Do you wish to enable automatic control?
Yes mode :
This function performs automatic distinction
of On or Off.
6
Press Q to display the Auto Tuning startup
screen. Press Q to start the automatic
search.
Auto Tuning
Progress
1%
When the automatic search is completed,
the TV will automatically appear the Manual
Tuning menu (- page 13).
Home
Yes
Yes
Found
0