Toshiba 32CV700E Owner's Manual page 17

Picture Settings
Picture Mode
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Black/White Level
3
Press v or w to select the picture mode you
prefer and press Q.
Activating the picture preferences
You can customise current picture mode
settings as desired. For example, while selecting
"Dynamic," if you change the following items,
such as Picture Settings items, your new setting
is saved as Dynamic-user.
1
From the Picture Settings menu, press s
or r to select either Backlight, Contrast,
Brightness, Colour, Tint or Sharpness and
press Q.
2
Press v or w to adjust the settings.
Setting the Black/White Level
Black/White Level improves the contrast of the
picture.
1
From the Picture Settings menu, press s or
r to select Black/White Level.
2
Press v or w to select High, Off, Low or
Middle.
Using the Cinema Mode
A movie film's picture runs at 24 frames a second,
whereas movie software such as DVD, etc., that
you enjoy watching on TV at home runs at 30
(NTSC) or 25 (PAL) frames a second. To convert
this signal to reproduce a smooth motion and
picture quality, select the On mode.
Effective signal and setup conditions:
• When the Video input mode is selected.
• When the input signal format is 480i, 576i or
1080i signals.
1
From the Picture Settings menu, press s or
r to select Cinema Mode on the 2nd page.
Picture Settings
Cinema Mode
Colour Temperature
Reset
2
Press v or w to select On or Off.
Using the TV's features
1/2
Dynamic
100
100
50
50
0
0
High
2/2
Off
Note:
When a DVD movie with subtitle is playing back,
this mode may not work correctly.
Adjusting the Colour Temperature
Colour Temperature increases the warmth or
coolness of the picture by setting the red, green
or blue tint.
1
From the Picture Settings menu, press s or
r to select Colour Temperature on the 2nd
page, then press Q.
2
Press v or w to select Cool, Natural, or Warm
to suit your preference.
Colour Temperature
Colour Temperature
Red Level
Green Level
Blue Level
3
Press s or r to select Red Level, Green
Level or Blue Level, then press v or w to
adjust the setting as required.
Resetting the Picture Settings
1
From the Picture Settings menu, press s
or r to select Reset on the 2nd page, then
press Q.
Activating the Noise Reduction (NR)
If the receiving signal of MPEG is a mosquito
(grained) noise depending on the compression
and conversion, the picture is weak and the
picture is blurry, the picture may be improved
when using this function.
1
From the PICTURE menu, press s or r to
select Noise Reduction, and then press Q.
Noise Reduction
Auto NR
MPEG NR
DNR
2
Press s or r to select Auto NR, and then
press v or w to select On or Off.
Off mode :
MPEG NR menu and DNR menu are available.
• MPEG NR mode: Low, Middle, High or Off
• DNR (Digital Noise Reduction) mode: Low,
Middle, High or Off
Note:
DNR function is available for 480i and 576i
signals.
Cool
0
0
0
On
Auto
Auto
17