Reverse Lever; Presser Foot Pressure Dial; Lowering The Feed Teeth - Husqvarna Viking Emerald 122 User Manual

8

Reverse Lever

When you press the reverse lever
downwards, the machine will sew in
reverse. The machine will only sew in
reverse as long as the reverse lever is
pressed down.
1

Presser Foot Pressure Dial

1
Turn the pressure dial to adjust the
pressure of the presser foot on the
fabric when sewing on different
thicknesses of fabric. The pressure dial
should be set at 3 for regular sewing.
Reduce the pressure to 2 for appliqué,
cutwork and basting. Set the setting mark
at 1 when sewing stretch fabrics, chiffon,
lace, organdy and other ne fabrics. Set
on 0 for free motion.

Lowering the Feed Teeth

The drop feed lever is located on the
free-arm on the back of the machine.
To lower the feed teeth, push the lever in
the direction of the arrow, as illustrated.
To raise the feed teeth, push the lever in
the direction of the arrow, as illustrated,
and turn the handwheel toward you or
start sewing to bring the feed teeth up.
The feed teeth must be up for regular
1
sewing.
2
1 Reverse lever
1
Setting mark
1 Raised position
2 Lowered position