GE ZDP484NG Installation Instructions Manual page 20

ZXADJB30PSS, ZXADJB36PSS, ZXADJB48PSS Accessorg Installation
INSTALL COVER PANELS
See alternate method if side access is blocked.
• Hold the bottom cover over the bottom support
while driving one screw (provided)into each side.
• Place the top cover with shelf over the top wall
support. If you have access to the sides, secure
the panel with two screws on each side.
Secure the top cover with shelf to the top
support with screws through the front of the panel,
at the top corners. Use one screw on each side.
Install
Screw
Install
Screw
InstallCornerScrews
INSTALL COVER PANELS {cont.)
ALTERNATE METHOD: When side access is blocked
• Install bottom cover over the bottom support while
driving one screw into each side.
• Hold top cover in place while marking screw
locations,just below shelf support and onto bottom
cover.
• Remove the shelf and drill a 9/64" diameter
hole in the pencil-marked locations.
• Mount the top cover over the top support
and secure the front cover with screws through
the drilled holes on each side.
Install screws through each top corner.
Marl<Screw Locations
for Alternate Method
"- InstallScrew
"'_ on Each Side
InstallScrewin TopCorner o n Each Side
Shelf
2O