Advertisement
ZKTC36L/ZKTC36R
Trim
Kit
3/4"
Custom
PaneIs
Step
1
Remove
handles
and
trim
Fresh food door:
• Open door to 90 °
• Remove the Phillips head screws from the full length
handle, remove handle.
• Open the door fully to stop.
• Remove the screws from the aluminum trim, top
bottom, hinge and handle side.
• Retain screws. Discard original trim and handle.
Freezer drawer:
• Slide the drawer fully open,
• Lift out top and bottom freezer
baskets
• There are 2 sets of 4 screws on
the inside of the drawer
door
Insert putty knife behind screw
cover and snap off Retain screw
covers.
• Loosen all screws.
• Carefully,
lift off entire drawer
door.
• Place door on a protected
surface,
front side down. Take care not to
bend switch
plate on the bottom of
the door.
• Remove light switch plate by
backing out 3 Phillips head
screws. Retain switch
plate and
screws.
• Turn the drawer over, front side
up. Remove trim on both sides,
bottom and handle. Retain all
..
/.
screws.
_'
Draw, Slides
Light Switch Plate
Inside Freezer Drawer
/ Attachment
Screws /
Light Switch
Plate
T
T
T
Front Face Freezer Drawer
23
Advertisement
