Advertisement
Installation
30"
Bottom
Mount
Refrigerator
Step
3
Install
Side
Panels
• Side panels are not required when the refrigerator
is
installed into an enclosure.
Skip this step if you are
installing
into an enclosure.
• Side panels are required whenever
the sides of the
refrigerator
will be exposed and when
installed
between
frameless
cabinets.
See pages 3 and 4.
• Side panel installation
will be determined
by the
design of the side panel you have previously
chosen.
• Side panels must be installed plumb.
Illustration
A
Cabinet
1/4" Side panels - Insert end of side panel into case
trim. Fasten with Velcro strips provided.
Illustration
C
I
Ref_igerator_
Cabinet _
Refrigerator door \
1/2" to 3/4" Side Panels - Recessed front edge of side
panel. Fasten to adjacent
cabinet.
• If you choose to use 1/4" side panels, they should be
inserted into the case trim as illustrated.
Fasten the
panels to the refrigerator
with Velcro strips (provided)
before setting refrigerator
in place. See illustration
A.
• 1/2" to 3/4" side panels are normally
set into place and
fastened to adjacent
cabinetry
or the back wall before
rolling the refrigerator
into the opening. See illustra-
tions B and C.
Illustration B
1/2" to 3/4" Side Panels - Leading edge of side panel is
flush with cabinet front. Fasten to the back wall using a
cleat.
14
Advertisement
