Advertisement
Installation
36"
Bottom
]_[ount
Refriserator
Step
7
Connect
Water
Supply
Step
8
Install
1/4"
door
panels
Check to be sure that refrigerator
power cord is not
plugged into the wall outlet.
• Locate and bring copper tubing to the front of the
cabinet.
• The copper tubing should be just long enough to
reach the coupling.
Excess tubing length could interfer
with drawer
closing or toekick installation.
• Slip a 1/4-1/4 union nut (provided)
over both ends of
the copper tubing at the right front leg of the refrigera-
tor and couple the lines.
• Turn on the water to check for leaks.
I
If you are using 3/4" thick custom panels, SKIP THIS
STER See Custom Panel Dimensions
pages for panel
sizes with ZKTC36L or ZKTC36R trim kit and other kits.
Refer to trim kit installation
instructions
in this booklet.
Fresh food door panel:
• Open door to 90° stop. Remove the Phillips head
screws from the aluminum trim door handle.
• Remove handle. Retain all screws.
• Slide custom panel into the door trim.
• Replace door handles and secure with original
screws.
_J
Freezer drawer panel:
• Slide freezer
drawer
out about
half way.
• Remove
the Phillips
head screws
from the aluminum
trim door handle.
• Lift off handle. Retain screws.
• Slide custom panel into
the drawer trim.
• Replace the drawer
handle
and secure with
original
screws.
Remove
4 Screws
Install
Original
I
16
Advertisement
