GE GTUP270GM1WW Installation Instructions Manual page 9

Installation
DO
ELBOW HIGHLY
RECOMMENDED
USE
DO NOT _
EXCESSIVE
DON'T
EXHAUST
LENGTH _ _11
[-9-1DRYER EXHAUST TO RIGHT, LEFT
OR BOTTOM CABINET
A
WARNING - BEFORE PERFORMING
THIS EXHAUST INSTALLATION, BE SURE
TO DISCONNECT THE APPLIANCE FROM
ITSELECTRICAL SUPPLY.PROTECT
YOUR HANDS AND ARMS FROM SHARP
EDGES WHEN WORKING INSIDETHE
CABINET. BE SURE TO WEAR GLOVES
For downward venting, rotate elbow
sections so that elbow points downward
..........
L
REMOVE
DESIRED
KNOCKOUT
(ONLY 1)
0
!
FLO0
Instructions
EXHAUST TO LEFT OR RIGHT SIDE OF
CABINET
, For side clucting, remove the knockout (ONLY 1).
Rotate elbow sections so that the points to the side.
Preassemble 4" elbow with 4" duct. Use only 4" UL
approved rigid metal for ducting inside the dryer.
, Insert duct assembly through the side opening and
connect to the internal elbow.
CAUTION: Be sure n ot t opu,ordamage
the electrical wires inside the dryer when inserting the
duct.
4" UL approved rigid metal
TAPE
, Apply duct tape as shown on the joint between the dryer
internal duct and the straight duct pipe
_CAUTION:
Internal duct joints must be
[] secured with otherwise
tape,
they may separate and cause
a safety hazard.
9