For Recirculating Operation; Step 4, Install Upper Support Frame - GE Monogram ZV925 Installation Instructions Manual

Installation Instructions
INSTALLATION-RECIRCULATING
ISTEP 31 INSTALL AIR DEFLECTOR,
CUT DUCT FOR RECIRCULATING
OPERATION
• Temporarilg, slide the
air deflector into the
support frame.
. o_
J J_
FR
• Measure duct length
between the deflector and
over the exhaust opening.
• Cut duct piece to length
and set aside.
Duct
length
FRONT
ISTEP 41 INSTALL UPPER SUPPORT FRAME
• Raise the upper support
toward the ceiling. _ _1
• Thread the house wiring
through one of the large
holes, preferablg on the
left side.
• Carefullg engage the
ceiling mounting screws
to the keghole slots in
the top of the frame.
• Tighten the/4 mounting
screws against the frame.
• Install 2 safetg screws.
Keyhole
slots
Safety
screws
House
wiring slots
• Slide air deflector into
the support frame.
• Secure the deflector
to the support with
/4 screws.
• Install the duct
piece to the
bottom of the
deflector and seal
the connection
with duct tape.
19