Text Input - Siemens S40 User Manual

Hide thumbs Also See for S40:
Table of Contents

Advertisement

12

Text input

Using the keypad
Press the relevant key for the
Each key on your phone's keypad
intended letter, e.g. B. Now a table
contains a number of characters.
is shown in the display. Press the
The keypad can be operated in 4
key corresponding to the intended
ways: Alphanumeric grid and wheel
letter (B = 2).
mode, T9 mode, which is very use-
Which characters available on
ful in connection with SMS mes-
each key will depend on the key-
sages, plus digit-only mode.
pad language you have selected for
Switching between the different
your phone (see p. 64). Additional
modes is done by pressing the
language specific characters are
side key on the right-hand of the
accessed by pressing
phone.
The first letter will always be capi-
Press »CLEAR« briefly to delete
talized, which is indicated by the
one character.
symbol in the upper right-hand
Press »CLEAR« for one second
corner of the display. The second
to delete the entire text.
letter will automatically be lower-
case. Press
enter a capital letter again.
The caps lock function is enabled
by pressing
as the caps lock is active, the sym-
bol
will be seen in the upper
right-hand corner of the display.
Press
caps lock function.
Press
Address and phone books
grid mode
digits. Press the relevant key to
enter the intended digit.
To get additional punctuation and
symbols press
have access to five different pages,
each containing up to 9 symbols.
You can scroll through the pages
using the arrow keys. Press the rel-
evant key to enter the intended
symbol, e.g. on page one, 7 corre-
sponds to "@" .
.
if you want to
twice. As long
again to disable the
if you want to enter
Address and phone books
wheel mode
The characters available on each
key can be seen in the table below.
. You now
Press once to enter the first charac-
ter, twice to enter the second char-
acter, etc.
Press
3 times if you want
to enter a capital letter. To activate
the caps lock function, press
4 times. Press it once again to
deactivate the function.
mode
T9® Text Input is a feature enabling
you to more easily use SMS mes-
saging. The T9 feature allows you to
compose text messages with only
one keypress per letter. See p. 40.
mode
In this mode you can enter only
digits.
13

Advertisement

Table of Contents
loading

Table of Contents