Text Input With T9 - Siemens M55 User Manual

Text input with T9

"T9" deduces the correct word from
the individual key entries by making
comparisons with an extensive dic-
tionary.
Activate, deactivate T9
Open text menu, select
§Options§
input, then
T9
Activate T9.
§Edit§
Select Input language
Select the language in which you
want to compose your message.
Open text menu, select
§Options§
input, then
T9
guage.
Confirm. The new lan-
§Select§
guage is set.
Write a word using T9
Since the display changes as you pro-
ceed, it is best if you finish a word
without looking at the display.
Simply press the keys once only
where the relevant letter is located.
For "hotel", for example:
press briefly for
4 6 8 3 5
1
Press. A blank ends a
word.
Text entry
T9 preferred.
Input lan-
T9 Abc then type
Do not use special characters such as
Ä but rather use the standard charac-
ters, e.g. A; T9 will do the rest for
you.
0
Additional information
Set a full stop. A word is con-
cluded if it is followed by a
space. Within a word, a full
stop represents an apostrophe
or hyphen:
e.g.,
er's.
D
Go to the right. Ends a word.
Press briefly: Swap between:
abc, Abc, T9abc, T9Abc,
T9
ABC,
top line of display.
Hold down: All input modes
are displayed.
*
Press briefly: Select special
characters (p. 18).
Hold down: Opens input
menu (p. 18).
T9 word suggestions
If several options are found in the
dictionary for a key sequence
(a word), the most probable is dis-
played first.
The word must be §highlighted§. Then
press
»
again. The displayed word
is replaced with a differ-
ent word. If this is also in-
correct, repeat until the
correct word is displayed.
§provider.s§ = provid-
123. Status shown in
19