Text Input With T9 - Siemens SL55 User Manual

Text input with T9

"T9" deduces the correct word from
the individual key entries by making
comparisons with an extensive dic-
tionary.
Activate, deactivate T9
Open text menu, select
§Options§
T9 input, then select
T9 preferred.
Activate T9.
§Edit§
Select Input language
Select the language in which you
want to compose your message.
Open text menu, select
§Options§
input, then select
T9
language.
Confirm; the new lan-
§Select§
guage is set.
Write a word using T9
Since the display changes as you pro-
ceed it is best if you finish a word
without looking at the display.
Simply press the keys once only
where the relevant letter is located.
For "hotel", for example:
#
press briefly for
then type
4 6 8 3 5
1
Press. A blank ends a
word.
Text entry
Do not use special characters such as
Ä rather use the standard characters,
e.g. A; T9 will do the rest for you.
0 Additional information
D
#
*
Input
T9 word suggestions
If several options are found in the
dictionary for a key sequence
(a word), the most probable is dis-
played first.
The word must be §highlighted§.
Then press
»
T9
Abc
Entering a full stop. Within a
word, a full stop represents an
apostrophe or hyphen:
e.g. §provider.s§ = provider's.
Go to the right: Ends a word.
Press briefly: Swap between:
T9 T9
abc, Abc, abc,
T9
ABC, 123. Status shown in
top line of display.
Hold down: All input modes
are displayed.
Press briefly: Select special
characters (p. 20).
Hold down: Open input menu
(p. 20).
Again. The displayed
word is replaced with a
different word. If this is al-
so incorrect, repeat until
the correct word is dis-
played.
21
Abc,