Battery And Charging - Siemens S40 User Manual

Hide thumbs Also See for S40:
Table of Contents

Advertisement

6

Battery and charging

Slide the battery lid back into
Insert battery
position.
Remove the battery lid by
pressing and sliding it towards
yourself.
Insert the battery. Please
make sure that the contact
pins are facing against each
other.
Getting started
Charge battery
Facts & Tips
• When removing the battery your
Remove charger
phone should always be switched off.
Press 1 and pull out the charger
• The on/off key is the left-hand func-
plug.
tion key on your phone.
Getting started
Insert the charger plug at the
bottom of the telephone, and
it will start charging immedi-
ately.
Fully charging the battery
takes up to 120 minutes,
depending on the type of
charger used.
Facts & Tips
• When your battery needs recharg-
ing, the phone will emit a short warn-
ing tone and inform you in the display
that the battery needs charging, and
the LED on top of the telephone will
emit a fast red flash.
• If you don't connect the charger
within a short while, the telephone
will switch off automatically.
• If the battery is completely dis-
charged, it may take up to 15 minutes
before any information is shown in
the display.
• The phone will inform you when the
charger has been connected
correctly.
7
• During charging the top icon of the
battery indicator will animate a
charging sequence changinging from
to
. When the battery is fully
charged, the top icon will turn perma-
nently into
and the indicators
beneath it will be filled.
• In the Setup menu under Graphics
you can choose other kinds of battery
indicator symbols.
• To maintain an accurate battery
capacity indication, it is recommend-
ed to let the battery discharge com-
pletely from time to time .
• It is possible to use your phone
during charging.

Advertisement

Table of Contents
loading

Table of Contents