Table of Contents
Advertisement
38
Messages
Options with your messages
First
In addition to reading your mes-
Enter the List menu
sages, you can select the mes-
by pressing
sage, press »OPTION« and:
Select »Messages«
• Delete it
• Send a reply (only in inbox)
Outbox If you have entered a mes-
• Forward it to another phone
sage to be sent either as an SMS
number
message or via IrDa, but do not
• Edit it before sending it
want to send it right away, you can
• Extract a phone number, if any,
store it in the Outbox.
to call or store in your address or
phone books.
Sent items The messages you
• Call the sender (only in inbox)
send are automatically stored
• Send it via IrDA
under »Sent items« from where
they can always be retrieved again.
New message To send a message
you have to specify certain parame-
Drafts If you do not want to send
ters if these have not already been
your message right away and have
specified by your network operator.
not yet decided how to send it,
Enter the Message setup menu to
select »Save message«, and your
set up these parameters once and
message is automatically stored in
for all – otherwise you will be
»Drafts«.
asked to specify them each time
you wish to send a message.
By default, your phone is set to
use the built-in T9® text input fea-
ture, but you can also enter your
message using the keypad in the
List menu
conventional way known from your
• Send as SMS
address and phone books.
To be able to send SMS messages
you have to enter your network
Once you have selected »New
operator's telephone number for
Message«, you can start
this special service and to set up
entering your message.
different parameters for your mes-
Press »OK« when you have
sages. Enter the Setup menu to set
completed your message.
up these parameters once and for
all. See p. 61.
Select whether you want to
send the message as an SMS
• Send via IrDA
message or via IrDA.
If you select »Send via IrDA«, your
Press YES to send the mes-
phone will automatically activate
sage. Press NO to store it in
the IrDA port. If a connection is
your Outbox.
established successfully, the IrDA
port will automatically be deactivat-
Select »Save message« if you
ed 1 minute after the end of the
want the unspecified message
transmission.
to be stored in »Drafts«.
within 1 minute, the IrDA port will
automatically be deactivated and
you will have to try again.
List menu
If no connection is established
39
Facts & Tips
• If while writing a message you are
interrupted by an incoming call, your
message will be stored automatically
in
»Drafts«
.
• When communicating via IrDA, the
distance between your mobile phone
and the receiving unit should not
exceed 40 centimetres.
Advertisement
Table of Contents
