Charging The Battery - Siemens SL75 Manual

Hide thumbs Also See for SL75:
Table of Contents

Advertisement

of SL75 Hydra FUG, w/o ptt, us-en, A31008-H3300-A1-1-7619 (06.10.2005, 15:39)
left page (16)
16
Getting started
• Position the battery cover on the
device, slightly offset at the
6
top
, and then push in the direc-
tion of the arrow until it clicks into
7
place
7
• To remove, press the locking but-
8
ton
, push the battery cover
forwards slightly, and then lift it
up and out
8
Additional information
Please switch off your phone before remov-
ing the battery!
1.8 and 3 volt SIM cards are supported.
Please contact your service provider if you
have a different card.
.
6
9
.
9

Charging the battery

Charging
The battery is not fully charged
when delivered. Plug the charger ca-
ble into the bottom of the phone,
plug the power supply unit into a
mains power socket and charge
for at least two hours (for charging
via USB, see page 92). Do not
interrupt the charging procedure
prematurely.
Display when charging is
à
in progress.
Charging time
An empty battery is fully charged af-
ter about 2 hours. Charging is only
possible within a temperature range
of +5°C to +45°C (41°F to 113°F). If
the temperature rises/falls 5°C (9°F)
above/below this, the charge symbol
flashes a warning. The mains voltage
specified on the power supply unit
must not be exceeded.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents