Charging The Battery - Siemens A60 Short Operating Instructions

of A60 LionLite, kurz us, A31008-H5850-A1-1-7619 (15.10.03)
left page (15)

Charging the battery

The battery is not supplied fully
charged. Plug the charger cable into
the bottom of the phone, plug the
power supply unit into a mains power
socket and charge for at least two
hours.
Display when charging is in progress
h
Charging time
An empty battery is fully charged
after about 2 hours. Charging is only
possible within a temperature range
of +5 °C to +40 °C. If the tempera-
ture rises/falls 5 °C above/below this,
the charge symbol flashes a warn-
ing. The voltage specified on the
power supply unit must not be
exceeded.
During charging.
Getting started
Charge icon not visible
If the battery was fully discharged,
the charging symbol will not be
immediately visible on connection to
the power supply unit. It will appear
after up to two hours. In this case the
battery is fully charged after
3–4 hours.
Only use the power supply unit provided!
Display while in service
Charge level display during opera-
tion (empty-full):
a d g
A beep sounds when the battery is
nearly empty. The charge level of the
battery is displayed correctly only
after uninterrupted charging/dis-
charging. You should therefore not
remove the battery unnecessarily and
where possible not interrupt charging
prematurely.
Additional notes
The power supply unit will become hot after
extended use. This is normal and is not
dangerous.
15