Matrox Parhelia User Manual page 7

Step-by-step connection setup
WARNING:
your computer is turned on, it may be using monitor settings that are specific to the current
monitor connections. Some devices may be permanently damaged if incorrect settings are
used.
Note:
connectors and that all connectors are properly fastened.
Whenever you restart your computer, make sure your monitors are already turned on.
Otherwise, the software may not be able to properly detect your monitors.
Connect the first monitor
1
Connect your preferred monitor to the main
connector (
card.
If your monitor has a DVI connector,
connect it directly to the main connector of
your graphics card.
If your monitor has an HD-15 connector,
use the DVI-to-HD15 adapter included with
your Matrox product to connect your
monitor to the main connector.
Note:
time and one of these needs to use a DVI
connector, that monitor must be
connected to the main connector.
Don't change monitor connections while your computer is turned on. While
Whenever you change your connection setup, make sure you're using the correct
) on your Matrox graphics
A
If you want to use 3 monitors at a
Monitor connector (DVI)
Monitor connector (HD-15)
Matrox graphics card – User Guide 7