Fpm-3190Tv Input Select Operation Process - Advantech FPM-3190 Series User Manual

C.2.2 FPM-3190TV Input select operation process
Default setting for this devise is "Analog Source Input." If you want to
use other signal sources like DVI, Video, S-video. Please refer to the fol-
lowing flow chart.
Upon changing the signal input setting, the device will display what you
select in the next boot up!
Input mode - Analog
LED light on
Press OSD
key change input
Input mode - DVI
Press osd
change input mode
Input mode - Video
Press osd
change input mode
Input mod – S-Video
Press osd
change input mode
signal
If no
input connect
No Signal – Analog
Keep press exit
button sec
2
Exit
signal
If no
input connect
No Signal – DVI
Keep press exit
button sec
2
Exit
key
signal
If no
input connect
No Signal – Video
Exit
key
signal
If no
input connect
No Signal – S-Video
Exit
key
Analog signal input connect
On/Off
again or Press OSD
35 sec after
Analog signal input connect
On/Off
again or Press OSD
35 sec after
Analog signal input connect
On/Off
again or Press OSD
35 sec after
Analog signal input connect
On/Off
again or Press OSD
35 sec after
23
Backlight off
LED light on
Backlight off
Backlight off
Backlight off
Appendix C